|
Category |
Item # |
Description |
|
FILTER PLATES
PHOTO AVAILABLE
CLICK HERE |
3367 |
Thirty
Five 800mm polypropylene Lenser filter press plates, CGR (gasketed) corner
feed. Ported 1&3 button |
|
FILTER PLATES
PHOTO AVAILABLE
CLICK HERE |
3287 |
Three
New surplus 1000mm polypropylene Lenser filter press plates, CGR (gasketed)
with cloth, 25mm cake thickness, One 3 button plate, Two 1 button plates. |
|
FILTER PLATES
PHOTO AVAILABLE
CLICK HERE |
3280 |
800mm
polypropylene back-up plate, 2" thick, 13" from top of plate to bottom of
handle. |
|
FILTER PLATES
PHOTO AVAILABLE
CLICK HERE |
3279 |
Klinkau conversion slab. To convert
from 1225mm EnviroTech plate to 1200mm Klinkau corner feed plate stack. Each
eye is threaded. |
|
FILTER PLATES
PHOTO AVAILABLE
CLICK HERE |
2935 |
Eimco
800mm filter press plates, 32 mm cake thickness, center feed, four eyed
discharge, one 1 button intermediate gasketed plate, Eight 3 button
intermediate gasketed plates, Two 1 button tail gasketed plates, three
blanking plates. All have molded handles. Out of a JWI press. |
|
FILTER PLATES
PHOTO AVAILABLE
CLICK HERE |
2910 |
Unused, new surplus, 6 EnviroTech filter press plates, 4 one button & 2
three button intermediates, 1000mm, (CGR) gasketed, 32mm cake thickness. |
|
FILTER PLATES
PHOTO AVAILABLE
CLICK HERE |
3361 |
Klinkau 470mm CGR (gasketed) filter press plates, ported 1 & 3 button, 30
intermediate plates,
4 head
plates, 6 tail plates, 5 connection plates. |
|
FILTER PLATES
PHOTO AVAILABLE
CLICK HERE |
3362 |
Klinkau CPVC liner pipers, new surplus, Four 2" x 12" with lock nut, Seven
1" x 12" with lock nut |
|
FILTER PLATES
PHOTO AVAILABLE
CLICK HERE |
2902 |
16
liner pipes, new surplus, 2", sch 40, 304 stainless steel. Four... 24" long,
Four... 22" long, Four... 18" long,
Four.. 14" long |
|
FILTER PLATES
PHOTO AVAILABLE
CLICK HERE |
2098 |
Two Enviro Teck
Filter Plates, 800mm, CGR, 32mm cake, gaskets on opposite sides, centerfeed, 4 eyed
discharge (not 1 + 3 button) |
|
FILTER PLATES
PHOTO AVAILABLE
CLICK HERE |
2763 |
Filter press plates, 800mm, 32mm cake, CGR,
Eimco, JWI stamped on handles, gaskets on same side, handle height is 3"
above center line, new cloth on plates. One head plate, One tail plate,
Also one Lenser plate # 1 button, Plates are in very good condition.
|
FILTER PLATES |
2228A |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228B |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2223A |
LENSER Filter
Plate; 3 button; 1 inch; 29 7/8 inches wide; 29 7/8 inches high; 25 1/2 inch eye center to
center vertical and horizontal; ribbon flush with frame; 3 corner, POLYPROPYLENE |
FILTER PLATES |
2223B |
LENSER Filter
Plate; 3 button; 1 inch; 29 7/8 inches wide; 29 7/8 inches high; 25 1/2 inch eye center to
center vertical and horizontal; ribbon flush with frame; 3 corner, POLYPROPYLENE |
FILTER PLATES |
2223C |
LENSER Filter
Plate; 3 button; 1 inch; 29 7/8 inches wide; 29 7/8 inches high; 25 1/2 inch eye center to
center vertical and horizontal; ribbon flush with frame; 3 corner, POLYPROPYLENE |
FILTER PLATES |
2223D |
LENSER Filter
Plate; 3 button; 1 inch; 29 7/8 inches wide; 29 7/8 inches high; 25 1/2 inch eye center to
center vertical and horizontal; ribbon flush with frame; 3 corner, POLYPROPYLENE |
FILTER PLATES |
2223E |
LENSER Filter
Plate; 3 button; 1 inch; 29 7/8 inches wide; 29 7/8 inches high; 25 1/2 inch eye center to
center vertical and horizontal; ribbon flush with frame; 3 corner, POLYPROPYLENE |
FILTER PLATES |
2224A |
LENSER Filter
Plate; 1 button; corner hole diameter: 2 inches; ribbon flush with frame; overall width of
the plate, not including the handle: 29 7/8 inches; overall height of the plate: 29 7/8
inches; center to center hole spacing, vertical; 25 1/2 inches; center to center hole
spacing, horizontal: 25 3/8 inches; dimension from bottom of handle to bottom of plate: 17
7/8 inches; plate thickness: 1 inch; 3 corner hole diameter: 2 inch; POLYPROPYLENE |
FILTER PLATES |
2224B |
LENSER Filter
Plate; 1 button; corner hole diameter: 2 inches; ribbon flush with frame; overall width of
the plate, not including the handle: 29 7/8 inches; overall height of the plate: 29 7/8
inches; center to center hole spacing, vertical; 25 1/2 inches; center to center hole
spacing, horizontal: 25 3/8 inches; dimension from bottom of handle to bottom of plate: 17
7/8 inches; plate thickness: 1 inch; 3 corner hole diameter: 2 inch; POLYPROPYLENE |
FILTER PLATES |
2224C |
LENSER Filter
Plate; 1 button; corner hole diameter: 2 inches; ribbon flush with frame; overall width of
the plate, not including the handle: 29 7/8 inches; overall height of the plate: 29 7/8
inches; center to center hole spacing, vertical; 25 1/2 inches; center to center hole
spacing, horizontal: 25 3/8 inches; dimension from bottom of handle to bottom of plate: 17
7/8 inches; plate thickness: 1 inch; 3 corner hole diameter: 2 inch; POLYPROPYLENE |
FILTER PLATES |
2224D |
LENSER Filter
Plate; 1 button; corner hole diameter: 2 inches; ribbon flush with frame; overall width of
the plate, not including the handle: 29 7/8 inches; overall height of the plate: 29 7/8
inches; center to center hole spacing, vertical; 25 1/2 inches; center to center hole
spacing, horizontal: 25 3/8 inches; dimension from bottom of handle to bottom of plate: 17
7/8 inches; plate thickness: 1 inch; 3 corner hole diameter: 2 inch; POLYPROPYLENE |
FILTER PLATES |
2225A |
LENSER Filter
Plate; 3 button; 1 inch; 29 7/8 inches wide; 29 7/8 inches high; 25 1/2 inch eye center to
center vertical and horizontal; ribbon flush LENSER Filter Plate; 1 inch; ribbed flush
with frame; 4 corner hole diameter: 4inches; overall width of plate: 29 7/8 inches;
overall height of plate: 29 7/8 inches; width of plate does not include the handle; height
from bottom of handle to bottom surface of plate: 18 inches; center to center dimension of
holes, both vertical and horizontal: 25 1/2 inches |
FILTER PLATES |
2225B |
LENSER Filter
Plate; 3 button; 1 inch; 29 7/8 inches wide; 29 7/8 inches high; 25 1/2 inch eye center to
center vertical and horizontal; ribbon flush LENSER Filter Plate; 1 inch; ribbed flush
with frame; 4 corner hole diameter: 4inches; overall width of plate: 29 7/8 inches;
overall height of plate: 29 7/8 inches; width of plate does not include the handle; height
from bottom of handle to bottom surface of plate: 18 inches; center to center dimension of
holes, both vertical and horizontal: 25 1/2 inches |
FILTER PLATES |
2225C |
LENSER Filter
Plate; 3 button; 1 inch; 29 7/8 inches wide; 29 7/8 inches high; 25 1/2 inch eye center to
center vertical and horizontal; ribbon flush LENSER Filter Plate; 1 inch; ribbed flush
with frame; 4 corner hole diameter: 4inches; overall width of plate: 29 7/8 inches;
overall height of plate: 29 7/8 inches; width of plate does not include the handle; height
from bottom of handle to bottom surface of plate: 18 inches; center to center dimension of
holes, both vertical and horizontal: 25 1/2 inches |
FILTER PLATES |
2225D |
LENSER Filter
Plate; 3 button; 1 inch; 29 7/8 inches wide; 29 7/8 inches high; 25 1/2 inch eye center to
center vertical and horizontal; ribbon flush LENSER Filter Plate; 1 inch; ribbed flush
with frame; 4 corner hole diameter: 4inches; overall width of plate: 29 7/8 inches;
overall height of plate: 29 7/8 inches; width of plate does not include the handle; height
from bottom of handle to bottom surface of plate: 18 inches; center to center dimension of
holes, both vertical and horizontal: 25 1/2 inches |
FILTER PLATES |
2225E |
LENSER Filter
Plate; 3 button; 1 inch; 29 7/8 inches wide; 29 7/8 inches high; 25 1/2 inch eye center to
center vertical and horizontal; ribbon flush LENSER Filter Plate; 1 inch; ribbed flush
with frame; 4 corner hole diameter: 4inches; overall width of plate: 29 7/8 inches;
overall height of plate: 29 7/8 inches; width of plate does not include the handle; height
from bottom of handle to bottom surface of plate: 18 inches; center to center dimension of
holes, both vertical and horizontal: 25 1/2 inches |
FILTER PLATES |
2226A |
LENSER Filter
Plate; plate thickness; 1 inch; plate ribbed flush with frame; One Button; 4 corner hole
diameter 2 inches; feed hole top of plate only; overall width of plate and over all height
of plate: 29 7/8 inches; both horizontal and vertical of center to center hole dimension
is 25 3/8 inches; dimension from bottom of handle to bottom of plate is 17 7/8 inches. |
FILTER PLATES |
2226B |
LENSER Filter
Plate; plate thickness; 1 inch; plate ribbed flush with frame; One Button; 4 corner hole
diameter 2 inches; feed hole top of plate only; overall width of plate and over all height
of plate: 29 7/8 inches; both horizontal and vertical of center to center hole dimension
is 25 3/8 inches; dimension from bottom of handle to bottom of plate is 17 7/8 inches. |
FILTER PLATES |
2226C |
LENSER Filter
Plate; plate thickness; 1 inch; plate ribbed flush with frame; One Button; 4 corner hole
diameter 2 inches; feed hole top of plate only; overall width of plate and over all height
of plate: 29 7/8 inches; both horizontal and vertical of center to center hole dimension
is 25 3/8 inches; dimension from bottom of handle to bottom of plate is 17 7/8 inches. |
FILTER PLATES |
2226D |
LENSER Filter
Plate; plate thickness; 1 inch; plate ribbed flush with frame; One Button; 4 corner hole
diameter 2 inches; feed hole top of plate only; overall width of plate and over all height
of plate: 29 7/8 inches; both horizontal and vertical of center to center hole dimension
is 25 3/8 inches; dimension from bottom of handle to bottom of plate is 17 7/8 inches. |
FILTER PLATES |
2226E |
LENSER Filter
Plate; plate thickness; 1 inch; plate ribbed flush with frame; One Button; 4 corner hole
diameter 2 inches; feed hole top of plate only; overall width of plate and over all height
of plate: 29 7/8 inches; both horizontal and vertical of center to center hole dimension
is 25 3/8 inches; dimension from bottom of handle to bottom of plate is 17 7/8 inches. |
FILTER PLATES |
2227A |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2227B |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2227C |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2227D |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2227E |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228C |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228D |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228E |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228F |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228G |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228H |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228I |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228J |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228K |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228L |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228M |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228N |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2228P |
Filter Plate
Frame: 4 corner hole diameter 1 1/2 inches; thickness: 2 inches; Height and width
dimensions; both: 29 7/8 inches; bottom of hole to the top of the plate is 5 7/8 inches;
distance between holes, center to center: 21 1/4 inches; distance between bottom of the
handle and the bottom of the plate: 17 7/8 inches |
FILTER PLATES |
2229A |
Filter plates: 1
3/16 inch thick; ribbed flush with frame; 4 corner hole diameter: 2 inches; overall width
and height of plate, out to out: 29 7/8 inches; feed holes 6 3/16 inches from top surface
of plate to bottom surface of the hole; 5 7/16 inch holes. Center to center dimension of
holes, horizontal: 26 inches; center to center of holes, vertical: 21 1/4 inches. |
FILTER PLATES |
2229B |
Filter plates: 1
3/16 inch thick; ribbed flush with frame; 4 corner hole diameter: 2 inches; overall width
and height of plate, out to out: 29 7/8 inches; feed holes 6 3/16 inches from top surface
of plate to bottom surface of the hole; 5 7/16 inch holes. Center to center dimension of
holes, horizontal: 26 inches; center to center of holes, vertical: 21 1/4 inches. |
FILTER PLATES |
2229C |
Filter plates: 1
3/16 inch thick; ribbed flush with frame; 4 corner hole diameter: 2 inches; overall width
and height of plate, out to out: 29 7/8 inches; feed holes 6 3/16 inches from top surface
of plate to bottom surface of the hole; 5 7/16 inch holes. Center to center dimension of
holes, horizontal: 26 inches; center to center of holes, vertical: 21 1/4 inches. |
FILTER PLATES |
2229D |
Filter plates: 1
3/16 inch thick; ribbed flush with frame; 4 corner hole diameter: 2 inches; overall width
and height of plate, out to out: 29 7/8 inches; feed holes 6 3/16 inches from top surface
of plate to bottom surface of the hole; 5 7/16 inch holes. Center to center dimension of
holes, horizontal: 26 inches; center to center of holes, vertical: 21 1/4 inches. |
FILTER PLATES |
2229E |
Filter plates: 1
3/16 inch thick; ribbed flush with frame; 4 corner hole diameter: 2 inches; overall width
and height of plate, out to out: 29 7/8 inches; feed holes 6 3/16 inches from top surface
of plate to bottom surface of the hole; 5 7/16 inch holes. Center to center dimension of
holes, horizontal: 26 inches; center to center of holes, vertical: 21 1/4 inches. |
FILTER PLATES |
2229F |
Filter plates: 1
3/16 inch thick; ribbed flush with frame; 4 corner hole diameter: 2 inches; overall width
and height of plate, out to out: 29 7/8 inches; feed holes 6 3/16 inches from top surface
of plate to bottom surface of the hole; 5 7/16 inch holes. Center to center dimension of
holes, horizontal: 26 inches; center to center of holes, vertical: 21 1/4 inches. |
FILTER PLATES |
2229G |
Filter plates: 1
3/16 inch thick; ribbed flush with frame; 4 corner hole diameter: 2 inches; overall width
and height of plate, out to out: 29 7/8 inches; feed holes 6 3/16 inches from top surface
of plate to bottom surface of the hole; 5 7/16 inch holes. Center to center dimension of
holes, horizontal: 26 inches; center to center of holes, vertical: 21 1/4 inches. |
FILTER PLATES |
2229H |
Filter plates: 1
3/16 inch thick; ribbed flush with frame; 4 corner hole diameter: 2 inches; overall width
and height of plate, out to out: 29 7/8 inches; feed holes 6 3/16 inches from top surface
of plate to bottom surface of the hole; 5 7/16 inch holes. Center to center dimension of
holes, horizontal: 26 inches; center to center of holes, vertical: 21 1/4 inches. |
FILTER PLATES |
2229I |
Filter plates: 1
3/16 inch thick; ribbed flush with frame; 4 corner hole diameter: 2 inches; overall width
and height of plate, out to out: 29 7/8 inches; feed holes 6 3/16 inches from top surface
of plate to bottom surface of the hole; 5 7/16 inch holes. Center to center dimension of
holes, horizontal: 26 inches; center to center of holes, vertical: 21 1/4 inches. |
FILTER PLATES |
2229J |
Filter plates: 1
3/16 inch thick; ribbed flush with frame; 4 corner hole diameter: 2 inches; overall width
and height of plate, out to out: 29 7/8 inches; feed holes 6 3/16 inches from top surface
of plate to bottom surface of the hole; 5 7/16 inch holes. Center to center dimension of
holes, horizontal: 26 inches; center to center of holes, vertical: 21 1/4 inches. |
FILTER PLATES |
2229K |
Filter plates: 1
3/16 inch thick; ribbed flush with frame; 4 corner hole diameter: 2 inches; overall width
and height of plate, out to out: 29 7/8 inches; feed holes 6 3/16 inches from top surface
of plate to bottom surface of the hole; 5 7/16 inch holes. Center to center dimension of
holes, horizontal: 26 inches; center to center of holes, vertical: 21 1/4 inches. |
FILTER PLATES |
2229L |
Filter plates: 1
3/16 inch thick; ribbed flush with frame; 4 corner hole diameter: 2 inches; overall width
and height of plate, out to out: 29 7/8 inches; feed holes 6 3/16 inches from top surface
of plate to bottom surface of the hole; 5 7/16 inch holes. Center to center dimension of
holes, horizontal: 26 inches; center to center of holes, vertical: 21 1/4 inches. |
FILTER PLATES |
2229M |
Filter plates: 1
3/16 inch thick; ribbed flush with frame; 4 corner hole diameter: 2 inches; overall width
and height of plate, out to out: 29 7/8 inches; feed holes 6 3/16 inches from top surface
of plate to bottom surface of the hole; 5 7/16 inch holes. Center to center dimension of
holes, horizontal: 26 inches; center to center of holes, vertical: 21 1/4 inches. |
FILTER PLATES |
2230A |
Filter Plates; 1
inch thick; ribbed flush with frame; Overall width and overall height: 29 7/8 inches; 4
corner hole diameter: 1 1/2 inches; Center to center of holes, vertical 21 3/16 inches;
horizontal: 25 7/8 inches; distance between bottom of handle and bottom of frame: 17 7/8
inches. |
FILTER PLATES |
2230B |
Filter Plates; 1
inch thick; ribbed flush with frame; Overall width and overall height: 29 7/8 inches; 4
corner hole diameter: 1 1/2 inches; Center to center of holes, vertical 21 3/16 inches;
horizontal: 25 7/8 inches; distance between bottom of handle and bottom of frame: 17 7/8
inches. |
FILTER PLATES |
2230C |
Filter Plates; 1
inch thick; ribbed flush with frame; Overall width and overall height: 29 7/8 inches; 4
corner hole diameter: 1 1/2 inches; Center to center of holes, vertical 21 3/16 inches;
horizontal: 25 7/8 inches; distance between bottom of handle and bottom of frame: 17 7/8
inches. |
FILTER PLATES |
2230D |
Filter Plates; 1
inch thick; ribbed flush with frame; Overall width and overall height: 29 7/8 inches; 4
corner hole diameter: 1 1/2 inches; Center to center of holes, vertical 21 3/16 inches;
horizontal: 25 7/8 inches; distance between bottom of handle and bottom of frame: 17 7/8
inches. |
FILTER PLATES |
2230E |
Filter Plates; 1
inch thick; ribbed flush with frame; Overall width and overall height: 29 7/8 inches; 4
corner hole diameter: 1 1/2 inches; Center to center of holes, vertical 21 3/16 inches;
horizontal: 25 7/8 inches; distance between bottom of handle and bottom of frame: 17 7/8
inches. |
FILTER PLATES |
2231A |
LENSER Filter
Plates: 1 inch thick x 29 7/8 inches high by 29 7/8 inches wide; 17 7/8 inches from the
bottom surface of the handle to the bottom surface of the frame; 4 corner holes, diameter
2 inches; Center to center feed holes, horizontal: 25 3/8 inches; Center to center feed
holes, vertical: 25 1/2 inches. |
FILTER PLATES |
2231B |
LENSER Filter
Plates: 1 inch thick x 29 7/8 inches high by 29 7/8 inches wide; 17 7/8 inches from the
bottom surface of the handle to the bottom surface of the frame; 4 corner holes, diameter
2 inches; Center to center feed holes, horizontal: 25 3/8 inches; Center to center feed
holes, vertical: 25 1/2 inches. |
FILTER PLATES |
2231C |
LENSER Filter
Plates: 1 inch thick x 29 7/8 inches high by 29 7/8 inches wide; 17 7/8 inches from the
bottom surface of the handle to the bottom surface of the frame; 4 corner holes, diameter
2 inches; Center to center feed holes, horizontal: 25 3/8 inches; Center to center feed
holes, vertical: 25 1/2 inches. |
FILTER PLATES |
2231D |
LENSER Filter
Plates: 1 inch thick x 29 7/8 inches high by 29 7/8 inches wide; 17 7/8 inches from the
bottom surface of the handle to the bottom surface of the frame; 4 corner holes, diameter
2 inches; Center to center feed holes, horizontal: 25 3/8 inches; Center to center feed
holes, vertical: 25 1/2 inches. |
FILTER PLATES |
2231E |
LENSER Filter
Plates: 1 inch thick x 29 7/8 inches high by 29 7/8 inches wide; 17 7/8 inches from the
bottom surface of the handle to the bottom surface of the frame; 4 corner holes, diameter
2 inches; Center to center feed holes, horizontal: 25 3/8 inches; Center to center feed
holes, vertical: 25 1/2 inches. |
FILTER PLATES |
2231F |
LENSER Filter
Plates: 1 inch thick x 29 7/8 inches high by 29 7/8 inches wide; 17 7/8 inches from the
bottom surface of the handle to the bottom surface of the frame; 4 corner holes, diameter
2 inches; Center to center feed holes, horizontal: 25 3/8 inches; Center to center feed
holes, vertical: 25 1/2 inches. |
FILTER PLATES |
2231G |
LENSER Filter
Plates: 1 inch thick x 29 7/8 inches high by 29 7/8 inches wide; 17 7/8 inches from the
bottom surface of the handle to the bottom surface of the frame; 4 corner holes, diameter
2 inches; Center to center feed holes, horizontal: 25 3/8 inches; Center to center feed
holes, vertical: 25 1/2 inches. |
FILTER PLATES |
2231H |
LENSER Filter
Plates: 1 inch thick x 29 7/8 inches high by 29 7/8 inches wide; 17 7/8 inches from the
bottom surface of the handle to the bottom surface of the frame; 4 corner holes, diameter
2 inches; Center to center feed holes, horizontal: 25 3/8 inches; Center to center feed
holes, vertical: 25 1/2 inches. |
FILTER PLATES |
2231I |
LENSER Filter
Plates: 1 inch thick x 29 7/8 inches high by 29 7/8 inches wide; 17 7/8 inches from the
bottom surface of the handle to the bottom surface of the frame; 4 corner holes, diameter
2 inches; Center to center feed holes, horizontal: 25 3/8 inches; Center to center feed
holes, vertical: 25 1/2 inches. |
FILTER PLATES |
2231J |
LENSER Filter
Plates: 1 inch thick x 29 7/8 inches high by 29 7/8 inches wide; 17 7/8 inches from the
bottom surface of the handle to the bottom surface of the frame; 4 corner holes, diameter
2 inches; Center to center feed holes, horizontal: 25 3/8 inches; Center to center feed
holes, vertical: 25 1/2 inches. |
FILTER PLATES |
2232A |
Lenser Fiter Plate
Frame: 3 corner, hole diameter: 2 inches; thickness 1 inch; horizontal and vertical
dimensions: 29 7/8; distance from bottom of handle to bottom of frame: 17 7/8 inches;
center to center of holes, horizontal: 25 3/8" inches and vertical: 25 1/2" |
FILTER PLATES |
2232B |
Lenser Fiter Plate
Frame: 3 corner, hole diameter: 2 inches; thickness 1 inch; horizontal and vertical
dimensions: 29 7/8; distance from bottom of handle to bottom of frame: 17 7/8 inches;
center to center of holes, horizontal: 25 3/8" inches and vertical: 25 1/2" |
FILTER PLATES |
2232C |
Lenser Fiter Plate
Frame: 3 corner, hole diameter: 2 inches; thickness 1 inch; horizontal and vertical
dimensions: 29 7/8; distance from bottom of handle to bottom of frame: 17 7/8 inches;
center to center of holes, horizontal: 25 3/8" inches and vertical: 25 1/2" |
FILTER PLATES |
2232D |
Lenser Fiter Plate
Frame: 3 corner, hole diameter: 2 inches; thickness 1 inch; horizontal and vertical
dimensions: 29 7/8; distance from bottom of handle to bottom of frame: 17 7/8 inches;
center to center of holes, horizontal: 25 3/8" inches and vertical: 25 1/2" |
FILTER PLATES |
2232E |
Lenser Fiter Plate
Frame: 3 corner, hole diameter: 2 inches; thickness 1 inch; horizontal and vertical
dimensions: 29 7/8; distance from bottom of handle to bottom of frame: 17 7/8 inches;
center to center of holes, horizontal: 25 3/8" inches and vertical: 25 1/2" |
FILTER PLATES |
2233A |
FILTER Plate
frames: SPERRY; 4 corner hole diameter, 2 inches; Horizontal out to out: 25 1/2 inches;
Vertical out to out: 30 3/8 inches; Thickness: 2 inches; distance from bottom of handle to
bottom of frame: 18 1/4 inches: Center to center of holes, vertical: 25 1/2 inches and
horizontal, 25 1/2 inches. |
FILTER PLATES |
2233B |
FILTER Plate
frames: SPERRY; 4 corner hole diameter, 2 inches; Horizontal out to out: 25 1/2 inches;
Vertical out to out: 30 3/8 inches; Thickness: 2 inches; distance from bottom of handle to
bottom of frame: 18 1/4 inches: Center to center of holes, vertical: 25 1/2 inches and
horizontal, 25 1/2 inches. |
FILTER PLATES |
2233C |
FILTER Plate
frames: SPERRY; 4 corner hole diameter, 2 inches; Horizontal out to out: 25 1/2 inches;
Vertical out to out: 30 3/8 inches; Thickness: 2 inches; distance from bottom of handle to
bottom of frame: 18 1/4 inches: Center to center of holes, vertical: 25 1/2 inches and
horizontal, 25 1/2 inches. |
FILTER PLATES |
2233D |
FILTER Plate
frames: SPERRY; 4 corner hole diameter, 2 inches; Horizontal out to out: 25 1/2 inches;
Vertical out to out: 30 3/8 inches; Thickness: 2 inches; distance from bottom of handle to
bottom of frame: 18 1/4 inches: Center to center of holes, vertical: 25 1/2 inches and
horizontal, 25 1/2 inches. |
FILTER PLATES |
2233E |
FILTER Plate
frames: SPERRY; 4 corner hole diameter, 2 inches; Horizontal out to out: 25 1/2 inches;
Vertical out to out: 30 3/8 inches; Thickness: 2 inches; distance from bottom of handle to
bottom of frame: 18 1/4 inches: Center to center of holes, vertical: 25 1/2 inches and
horizontal, 25 1/2 inches. |
FILTER PLATES |
2233F |
FILTER Plate
frames: SPERRY; 4 corner hole diameter, 2 inches; Horizontal out to out: 25 1/2 inches;
Vertical out to out: 30 3/8 inches; Thickness: 2 inches; distance from bottom of handle to
bottom of frame: 18 1/4 inches: Center to center of holes, vertical: 25 1/2 inches and
horizontal, 25 1/2 inches. |
FILTER PLATES |
2234A |
FILTER PLATE
frames: SPERRY; 4 corner hole diameter, 2 inches; Horizontal out to out: 25 1/2 inches;
Vertical out to out: 30 3/8 inches;Thickness: 2 inches; distance from bottom of handle to
bottom of frame: 18 1/4 inches; Holes center to center vertical: 25 1/2 inches and
horizontal: 29 7/8 inches; thickness: 1 inch. 3 corner hole diameter: 2 inches. |
FILTER PLATES |
2234B |
FILTER PLATE
frames: SPERRY; 4 corner hole diameter, 2 inches; Horizontal out to out: 25 1/2 inches;
Vertical out to out: 30 3/8 inches; Thickness: 2 inches; distance from bottom of handle to
bottom of frame: 18 1/4 inches; Holes center to center vertical: 25 1/2 inches and
horizontal: 29 7/8 inches; thickness: 1 inch. 3 corner hole diameter: 2 inches. |
FILTER PLATES |
2234C |
FILTER PLATE
frames: SPERRY; 4 corner hole diameter, 2 inches; Horizontal out to out: 25 1/2 inches;
Vertical out to out: 30 3/8 inches; Thickness: 2 inches; distance from bottom of handle to
bottom of frame: 18 1/4 inches; Holes center to center vertical: 25 1/2 inches and
horizontal: 29 7/8 inches; thickness: 1 inch. 3 corner hole diameter: 2 inches. |
FILTER PLATES |
2234D |
FILTER PLATE
frames: SPERRY; 4 corner hole diameter, 2 inches; Horizontal out to out: 25 1/2 inches;
Vertical out to out: 30 3/8 inches; Thickness: 2 inches; distance from bottom of handle to
bottom of frame: 18 1/4 inches; Holes center to center vertical: 25 1/2 inches and
horizontal: 29 7/8 inches; thickness: 1 inch. 3 corner hole diameter: 2 inches. |
FILTER PLATES |
2234E |
FILTER PLATE
frames: SPERRY; 4 corner hole diameter, 2 inches; Horizontal out to out: 25 1/2 inches;
Vertical out to out: 30 3/8 inches; Thickness: 2 inches; distance from bottom of handle to
bottom of frame: 18 1/4 inches; Holes center to center vertical: 25 1/2 inches and
horizontal: 29 7/8 inches; thickness: 1 inch. 3 corner hole diameter: 2 inches. |
FILTER PLATES |
2234F |
FILTER PLATE
frames: SPERRY; 4 corner hole diameter, 2 inches; Horizontal out to out: 25 1/2 inches;
Vertical out to out: 30 3/8 inches; Thickness: 2 inches; distance from bottom of handle to
bottom of frame: 18 1/4 inches; Holes center to center vertical: 25 1/2 inches and
horizontal: 29 7/8 inches; thickness: 1 inch. 3 corner hole diameter: 2 inches. |
FILTER PLATES |
2235A |
Filter Plate
Frame, Sperry, 1 inch thick; 3 corner hole diameter: 2 inches; Out to out horizontal: 29
7/8 inches; out to out vertical: 30 3/8 inches; hole center to center horizontal: 25 5/16
inches; hole center to center vertical: 25 5/16 inches; dimension from bottom surface of
handle to bottom surface of the plate: 18 3/4 inches. |
FILTER PLATES |
2235B |
Filter Plate
Frame, Sperry, 1 inch thick; 3 corner hole diameter: 2 inches; Out to out horizontal: 29
7/8 inches; out to out vertical: 30 3/8 inches; hole center to center horizontal: 25 5/16
inches; hole center to center vertical: 25 5/16 inches; dimension from bottom surface of
handle to bottom surface of the plate: 18 3/4 inches. |
FILTER PLATES |
2235C |
Filter Plate
Frame, Sperry, 1 inch thick; 3 corner hole diameter: 2 inches; Out to out horizontal: 29
7/8 inches; out to out vertical: 30 3/8 inches; hole center to center horizontal: 25 5/16
inches; hole center to center vertical: 25 5/16 inches; dimension from bottom surface of
handle to bottom surface of the plate: 18 3/4 inches. |
FILTER PLATES |
2235D |
Filter Plate
Frame, Sperry, 1 inch thick; 3 corner hole diameter: 2 inches; Out to out horizontal: 29
7/8 inches; out to out vertical: 30 3/8 inches; hole center to center horizontal: 25 5/16
inches; hole center to center vertical: 25 5/16 inches; dimension from bottom surface of
handle to bottom surface of the plate: 18 3/4 inches. |
FILTER PLATES |
2235E |
Filter Plate
Frame, Sperry, 1 inch thick; 3 corner hole diameter: 2 inches; Out to out horizontal: 29
7/8 inches; out to out vertical: 30 3/8 inches; hole center to center horizontal: 25 5/16
inches; hole center to center vertical: 25 5/16 inches; dimension from bottom surface of
handle to bottom surface of the plate: 18 3/4 inches. |
FILTER PLATES |
2235F |
Filter Plate
Frame, Sperry, 1 inch thick; 3 corner hole diameter: 2 inches; Out to out horizontal: 29
7/8 inches; out to out vertical: 30 3/8 inches; hole center to center horizontal: 25 5/16
inches; hole center to center vertical: 25 5/16 inches; dimension from bottom surface of
handle to bottom surface of the plate: 18 3/4 inches. |
FILTER PLATES |
2235G |
Filter Plate
Frame, Sperry, 1 inch thick; 3 corner hole diameter: 2 inches; Out to out horizontal: 29
7/8 inches; out to out vertical: 30 3/8 inches; hole center to center horizontal: 25 5/16
inches; hole center to center vertical: 25 5/16 inches; dimension from bottom surface of
handle to bottom surface of the plate: 18 3/4 inches. |
